36
www.hp.com
Desktop Management Guide
Desktop Management Guide
If two selections are available, go to step 7.
7. Use the up or down arrow key to move to
Reset to Factory
Settings—Do Not Reset
. Press the left or right arrow key once.
A message is displayed stating: Performing this action will reset
the embedded security device to factory settings if settings are
saved on exit. Press any key to continue.
Press
Enter
.
8. The selection will now read
Reset to Factory Settings—Reset
.
Press
F10
to accept the change.
9. Use the left or right arrow key to move to
File
. Use the up or
down arrow key to move to
Save Changes and Exit
. Press
Enter
, then press
F10
to confirm.
10. Restart the computer.
11. Press the
F10
key as soon as the monitor light turns green.
✎
If you do not press the
F10
key at the appropriate time, you must turn
the computer off, then on again, and press the
F10
key again to
access the utility.
12. Type the Setup password, then press
Enter
.
13. Use the up or down arrow key to select a language, then press
Enter
.
14. Use the left or right arrow key to move to the
Security
tab, then
use the up or down arrow key to move to
Embedded Security
Device
. Press
Enter
.
15. If the selection in the dialog box is
Embedded Security
Device—Disable
, use the left or right arrow key to change it to
Embedded Security Device—Enable
. Press
F10
.
16. Use the left or right arrow key to move to
File
. Use the up or
down arrow key to move to
Save Changes and Exit
. Press
Enter
, then press
F10
to confirm.
