Desktop Management Guide
www.hp.com
9
Desktop Management Guide
7. If the system successfully starts from the diskette and
successfully reprograms the ROM, then the three keyboard lights
will turn on. A rising tone series of beeps also signals successful
completion.
8. Remove the diskette and turn the power off.
9. Turn the power on again to restart the computer.
The following table lists the various keyboard light combinations
used by the Boot Block ROM (when a PS/2 keyboard is attached to
the computer), and explains the meaning and action associated with
each combination.
Keyboard Light Combinations Used by Boot Block ROM
FailSafe Boot
Block Mode
Keyboard
LED Color
Keyboard
LED Activity
State/Message
Num Lock
Green
On
ROMPaq diskette not present, is
bad, or drive not ready.
Caps Lock
Green
On
Enter password.
Num, Caps,
Scroll Lock
Green
Blink On in
sequence, one at
a time—N, C, SL
Keyboard locked in network mode.
Num, Caps,
Scroll Lock
Green
On
Boot Block ROM Flash successful.
Turn power off, then on to reboot.
✎
Diagnostic lights do not flash on USB keyboards.