Compaq Armada 4200 Скачать руководство пользователя страница 40

Страница: 40 / 178

5-4 Managing Power

Writer: Dianne Fielden Saved by: Johnnie Abercrombie Saved date: 09/18/97 10:00 AM

Part Number: 290779-001 File name: CH05

How Suspend Is Initiated

■

Suspend is initiated in one of three ways:

■

Manually, at any time, by pressing the suspend button

once.
The power/suspend indicator light

will blink slowly.

Suspend Button and Power/Suspend Indicator Light

■

Automatically, when a predefined timeout has been reached.
You can set the Suspend timeout period in Power Properties.
Or refer to “Setting a Timeout” in this chapter.

■

Manually, by clicking suspend from the Windows Start menu.

Initiating Suspend

When Suspend is initiated, the following occurs:

■

The computer beeps twice.

NOTE:

If speakers are turned off, beeps are not audible.

■

The screen blanks.

■

The power/suspend indicator light blinks.

Содержание Armada 4200



















































































































































































Результаты поиска

Содержание Armada 4200

Отзывы:

Похожие инструкции для Armada 4200

Бренды по названию

Популярные бренды

Compaq Armada 4200, Справочное руководство

Результаты поиска

Содержание Armada 4200

Отзывы:

Похожие инструкции для Armada 4200

Бренды по названию

Популярные бренды