Compaq 222863-001 - TaskSmart W2200 Model 10, Руководство по техническому обслуживанию и ремонту

Страница: 27 / 92

2-12 Compaq TaskSmart W2200 Appliance Server Maintenance and Service Guide
CD-ROM/Diskette Drive Assembly
To remove the CD-ROM/diskette drive assembly:
1. Power down the server. See “Powering Down the Server” earlier in this chapter.
2. Remove the shipping/ejector key from the chassis if you have not already done so. See
“Shipping/Ejector Key” earlier in this chapter.
3. Insert the shipping/ejector key approximately 1.25 cm (0.5 in.) into the CD-ROM/diskette
drive assembly ejector port on the lower right corner of the server front panel
to eject
the CD-ROM/diskette drive assembly
.
1
2
Figure 2-7. Ejecting the CD-ROM/diskette drive assembly
CAUTION: To reduce the risk of thermal damage, do not operate the server without the
CD-ROM/diskette drive assembly installed.
To replace the assembly, slide the assembly into the bay until it is fully seated.