Removal and Replacement Procedures
2-3
Rack Warnings
The following warnings refer to the rack that the TaskSmart W2200 appliance server is
deployed in during pallet unloading, server deployment, and different installations.
Unloading the Rack from the Pallet
115 kg
253 lb
WARNING:
To reduce the risk of personal injury or damage to the equipment:
■
Observe local occupational safety requirements and guidelines for heavy
equipment handling.
■
Obtain adequate assistance to lift and stabilize the product during installation
or removal.
■
Remove all pluggable power supplies and modules to reduce the weight of the
product.
■
Be sure that at least two people are available to safely unload the rack from
the pallet. An empty 42U rack weighs 115 kg (253 lb), is over 2.1 m (7 ft) tall,
and can become unstable when being moved on its casters. Do not stand in
front of the rack as it rolls down the ramp from the pallet; handle it from the
sides. Stabilize the server by keeping the unit on the rails.
Handling Components in the Rack
WARNING:
To reduce the risk of personal injury or damage to the equipment:
■
Always load the heaviest item first, and load the rack from the bottom up. This method
makes the rack “bottom-heavy” and helps prevent the rack from becoming unstable.
■
The bottom stabilizers on the equipment must be fully extended. Be sure that the
equipment is properly supported/braced when installing options and boards.
■
Be sure that the rack is adequately stabilized before extending a component outside the
rack. Extend only one component at a time. A rack can become unstable if more than one
component is extended.
WARNING:
To reduce the risk of personal injury, fire, or damage to the equipment, do not
overload the AC supply branch circuit that provides power to the rack.
Rack Stability
WARNING:
To reduce the risk of personal injury or damage to the equipment, be sure that:
■
The leveling jacks are extended to the floor.
■
The full weight of the rack rests on the leveling jacks.
■
The stabilizing feet are secured to the rack if it is a single-rack installation.
■
The racks are coupled together in multiple-rack installations.
■
Only one component is extended at a time. A rack can become unstable if more than one
component is extended for any reason.
Содержание 222863-001 - TaskSmart W2200 Model 10
Страница 6: ......
