QSG_RLGE2FE16R_REV– 3 Aug 2016 PAGE 7
QUICK START GUIDE
RLGE2FE16R
TECH SUPPORT: 1.888.678.9427
Logical Structure
Distance kept for natural air flow
Proper installation depends on natural air flow for cooling. You must maintain a 10cm distance
above and below the ComNet switch for proper air flow.
Grounding
To install the grounding wire:
»
Prepare a minimum 10 American Wire Gauge (AWG) grounding wire terminated by a crimped
two-hole lug. Use a suitable crimping tool to fasten the lug securely to the wire. Adhere to your
company’s policy as to the wire gauge and the number of crimps on the lug.
»
Apply some anti-oxidant onto the metal surface.
»
Mount the lug on the grounding posts, replace the spring-washers and fasten the bolts. Avoid
using excessive torque.
CAUTION – Do not remove the earth connection unless all power supply connections are
disconnected.
DANGER – Before connecting power to the platform, make sure that the grounding posts are
firmly connected to a reliable ground, as described below.
Connecting to a Power Source
CAUTION – Please refer to the RLGE2FE16R installation guide for complete installation
instructions.
Wiring DC Input voltage feed
Input voltage can be either AC or DC depending on the specific module you purchased. Please
