Comnet Netwave NWKSP1, Инструкция по установке и эксплуатации

Страница: 13 / 20

INS_NWKSP1_REV– 07/10/14 PAGE 13
INSTALLATION AND OPERATION MANUAL NWKSP1
TECH SUPPORT: 1.888.678.9427
Connect the Positive and Negative cables from the battery to the Controller battery terminals.
Battery Cables Connected to Controller Battery Terminals
Once batteries are connected to the controller, connect the PV cables from the solar panels to the
Solar Load terminals on the controller.
Solar Panel Cables Connected to Solar Load Terminals on Controller
Connect the 12" Bonded Red and Black cable to the green terminal adaptor then connect the
other end of the cable to the load terminals on the controller.
Red and Black Cable Connected Green Terminal Connector, left, and to Load Terminals on Controller, right.