Comnet Netwave NWKSP1, Инструкция по установке и эксплуатации

Страница: 9 / 20

INS_NWKSP1_REV– 07/10/14 PAGE 9
INSTALLATION AND OPERATION MANUAL NWKSP1
TECH SUPPORT: 1.888.678.9427
Attached the DIN Rail Adapters to the Controller and Power Injector then clip to the DIN Rail.
Controller and Power Injector Mounted on DIN Rail
Plug the external thermal sensor into the interface of the thermal-sensor on the left of the
controller.
Thermal Sensor Plugged into Controller
Insert battery platform in the enclosure. The cutouts in the platform are for routing cable under
the batteries.
Battery Platform on Floor of Enclosure