Comnet CNGE2FE8MSPOE2 Скачать руководство пользователя | Manualshive

Страница: 34 / 105

background image

INS_CNGE2FE8MSPOE2_REV–

12/20/12 PAGE 34

INSTALLATION AND OPERATION MANUAL

CNGE2FE8MSPOE2

TECH SUPPORT: 1.888.678.9427

Legacy Ring

Legacy Ring interface

Legacy ring provides support for the switch to be used in an existing ring of ComNet X-Ring
enabled switches.

X-Ring provides a faster redundant recovery than Spanning Tree topology. The action is similar
to STP or RSTP, but the algorithms between them are not the same. In the X-Ring topology, every
switch should be enabled with X-Ring or Legacy Ring function and two ports should be assigned
as the member ports in the ring. Only one switch in the X-Ring group would be set as the master
switch that one of its two member ports would be blocked, called backup port, and another port
is called working port. Other switches in the X-Ring group are called working switches and their
two member ports are called working ports. When the failure of network connection occurs,
the backup port of the master switch (Ring Master) will automatically become a working port to
recover from the failure.

The switch supports the function and interface for setting the switch as the ring master or not. The
ring master can negotiate and place command to other switches in the X-Ring group. If there are
2 or more switches in master mode, the software will select the switch with lowest MAC address
number as the ring master. The X-Ring master ring mode can be enabled by setting the Legacy
Ring configuration interface. Also, the user can identify whether the switch is the ring master by
checking the R.M. LED indicator on the front panel of the switch.

Label

Description

Legacy Ring

To enable the Legacy Ring (X-Ring) function, tick the checkbox beside
the Legacy Ring label. If this checkbox is not ticked, all the ring
functions are unavailable.

Master

Select Enable for this switch to be the ring master or Disable for this
switch to be a working switch.

1st Ring Port

The primary port, when this switch is Ring Master. Select a port to
assign from the pull down selection menu.

2nd Ring Port

The backup port, used when this switch is Ring Master and the primary
port fails. Select a port to assign from the pull down selection menu.

Save

Select to save changes.

Refresh

Select to refresh the page immediately.

«
...
32
33
34
35
36
...
»

Содержание CNGE2FE8MSPOE2










































































































Отзывы:

Нет отзывов

Похожие инструкции для CNGE2FE8MSPOE2

Бренд: Barksdale Страницы: 5

Бренд: Quick Страницы: 28

MMAC-Plus 9G426-02

Бренд: Cabletron Systems Страницы: 12

MMAC-Plus 9F310-02

Бренд: Cabletron Systems Страницы: 4

Бренд: Cabletron Systems Страницы: 16

Бренд: cable matters Страницы: 4

Бренд: CableCreation Страницы: 7

Бренд: Valcom Страницы: 2

Бренд: l-com Страницы: 12

Бренд: BERNSTEIN Страницы: 3

Бренд: N-Tron Страницы: 5

Бренд: LevelOne Страницы: 17

SET-2000 Oil/Sludge

Бренд: Labkotec Страницы: 15

Бренд: IPGARD Страницы: 2

START-LINE AGC-3500

Бренд: Trust Страницы: 16

Бренд: WTI Страницы: 56

Бренд: Hama Страницы: 36

Бренд: J-Tech Digital Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды