CommTech FASTCOM SuperFASTCOM, Справочник по аппаратуре

Страница: 19 / 32

12
2. Open a console/DOS window.
3. Change directories to where you installed/copied the software.
4. Execute: setclock 0 4000000
5. Execute: sfcset 0 hdlcset
6. Execute: loopback 0 h
The green and red LEDs for port 1 should be blinking/on. Wait a few moments, press a key,
and the errors/number of bytes sent through the loop will be displayed. The numbers will vary
depending on how long you allow the test to run
The rest of the ports can be checked by executing:
sfcset 1 hdlcset
loopback 1 h
sfcset 2 hdlcset
loopback 2 h
sfcset 3 hdlcset
loopback 3 h
SOFTWARE UTILITIES
These programs and their source can be found on the Fastcom CD or downloaded from
our website at
http://www.commtech-fastcom.com/ . They are meant to be used as
educational tools and programming references when designing your own software.
•
sfcset.exe Use to change register settings in conjunction with the hdlcset file
•
hdlcset, asyncset, bisyncset
Generic settings files to be used with sfcset.exe
•
getclock.exe returns programmable clock #1 rate (osc)
•
getclock2.exe returns programmable clock #2 rate (p/-)
•
setclock.exe sets the programmable clock #1 (osc)
•
setclock2.exe sets the programmable clock #2 (pro/-)
•
loopback.exe user program to effect a loopback on a SuperFastcom channel
•
sfcmfc.exe
o
Install your loopback plug onto the SuperFastcom.
o
Run “sfcmfc.exe”.
o
Select “connect” from the menu.
o
A dialog will open. Select the port to use (0,1,2,3).
o
Click on “OK”.
o
An info box will open; click “OK”.