www.commscope.com
860508548
Issue 3, October 2013
Module Removal
1. To remove a module for inspection or
repair, insert prongs of removal tool into
openings at sides of module and press
firmly.
Or
The module wiring cap can also be used to
remove a module. Insert prongs of cap into
openings at sides of module and press
firmly.
2. The module can then be removed from the
back.
Inspection or Repair of Termination
Note:
To enable inspection or repair, the wiring
cap can be released from the module using the
removal tool. A spudger tool can then be used
to remove conductors for repair.
1.
Insert end of removal tool into slot under
wiring cap and pivot it forward to release
cap.
Removal tool
Insert end of tool into
slot under wiring cap
Pivot removal tool forward
to disengage cap
Slot
Page 5 of 5
