v
Important Safety Instructions
Read and understand all instructions.
When installing, operating, or maintaining the SYSTIMAX
®
iPatch
®
equipment,
basic safety precautions should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the following:
1
Follow all warnings and instructions marked on this product.
2
This product should be operated using only the power supply provided by
SYSTIMAX
®
Solutions with the product. Consideration should be given to the
connection of the equipment to the supply circuit and the effect that
overloading of the circuits might have on overcurrent protection and supply
wiring. Appropriate consideration of equipment nameplate ratings should be
used when addressing this concern.
3
For proper mounting instructions, see Chapter 2, “Installing the iPatch
Equipment” in this manual.
4
Never install this product in wet locations or during lightning storms. There is a
remote risk of electric shock.
5
Do not place this product on an unstable cart, stand, or table. The product may
fall, causing serious damage to the product.
6
When installing iPatch equipment not described in this guide, follow the
instructions provided with that equipment. Care should be taken not to
compromise the stability of the rack by installation of equipment.
7
Never push objects of any kind into this product through slots as they may
touch dangerous voltage points or short out parts that could result in a risk of
fire or electrical shock. Never spill liquids of any kind on the product.
8
To reduce the risk of an electrical shock, do not disassemble this product.
Service should be performed by trained personnel only. Opening or removing
covers and/or circuit boards may expose you to dangerous voltages or other
risks. Incorrect reassembly can cause electrical shock when the unit is
subsequently used.
9
If this product is installed in a closed or multi-unit rack assembly, the operating
ambient temperature of the rack environment may be greater than the room
ambient temperature. Therefore, consideration should be given to installing the
equipment in an environment compatible with the product’s maximum ambient
temperature (104°F or 40°C).
10
Installation of the equipment in a rack should be such that the amount of airflow
required for safe operation of the equipment is not compromised.
Note:
All wiring that connects to the iPatch equipment must meet applicable local
and national building codes and network wiring standards for communication
cable.
Save these instructions.
The exclamation point within an equilateral triangle is intended to alert the
user to potential personal injury hazards.
!
