manualshive.com logo in svg

CommScope SYSTIMAX iPatch Panel, Руководство для руководителей

Поделиться
Скачать
CommScope SYSTIMAX iPatch Panel Скачать руководство пользователя страница 18

Guide:

 SYSTIMAX

®

 iPatch

®

 Panel Manager Guide

2–2

An Alternate Configuration

An alternate iPatch System configuration consists of the components listed below. 
This system configuration allows the voice and data network administrator to 
manage equipment rooms in areas where access to the Ethernet network is not 
available or is restricted because of data security considerations.

ƒ

iPatch System Manager Software running on a PC connected to an Ethernet 
network.

ƒ

a Rack Manager Plus in each building or on each floor that is connected to the 
same Ethernet network as the PC.

ƒ

a Rack Manager Plus

 

in each equipment room that is connected using the 

Network Manager LAN to the one Rack Manager Plus connected to the Ethernet 
network.

ƒ

a Rack Manager Plus

 

on each rack with iPatch Panels. All of the Rack Manager 

Plus units in each equipment room are connected to each other (including the 
Rack Manager Plus connected to the Network Manager LAN) using a Rack 
Manager LAN.

ƒ

iPatch Panels on each rack, which are connected to the rack’s Rack Manager 
Plus using the panel bus.

In this configuration, the System Manager Software can be used to send scheduled 
jobs to the iPatch equipment in each equipment room. The equipment in the 
equipment room alerts System Manager to any patching changes and to any 
problem conditions in the room.

Communications from the iPatch equipment in each equipment room are routed:

ƒ

over the Rack Manager LAN for the equipment room to the Rack Manager Plus 
connected to the Network Manager LAN

ƒ

via that Rack Manager Plus to the Network Manager LAN

ƒ

over the Network Manager LAN for the floor or building to the one Rack 
Manager Plus

 

connected to the Ethernet network

ƒ

via that Rack Manager Plus to the Ethernet network

ƒ

over the Ethernet network to the System Manager Software.

A patching job scheduled at System Manager is routed to the iPatch equipment in 
the equipment room where the job is to be performed, reversing the path described 
above.

A Stand-Alone System Configuration

The simplest iPatch System configuration consists of:

ƒ

an iPatch Manager on each rack with iPatch Panels. All of the iPatch Manager 
units in each equipment room are connected to each other using a Rack 
Manager LAN.

ƒ

iPatch Panels on each rack, which are connected to the rack’s iPatch Manager 
using the panel bus.

This “stand-alone” configuration does not require any connections to the Ethernet 
network and does not include the System Manager Software. This system provides 
tracing information to assist technicians and alerts technicians to problem 
conditions in the equipment room. However, this configuration does not provide the 
system’s guided patching features, and cannot alert the voice and data network 
administrator to problem conditions in the equipment room.

Содержание SYSTIMAX iPatch Panel
























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды