Guide:
SYSTIMAX
®
iPatch
®
Panel Manager Guide
2–6
2
Connect the 6-inch patch cord provided with the Network Manager to the
RACK MGR OUTPUT jack on the back of the Network Manager (Figure 2–3).
3
Connect the other end of the patch cord to the RACK MGR INPUT jack on the
back of the Panel Manager (Figure 2–3).
4
On the back of the Network Manager, connect one end of the power jumper
(provided with the Network Manager) to the PWR OUT jack (Figure 2–4).
5
On the back of the Panel Manager, connect the other end of the power jumper
to the PWR1 jack. Use the strain relief strap provided with the Network
Manager module to secure the power jumper to the patch cord connected to
the Panel Manager (Figure 2–4).
Figure 2–3
Connecting the Patch Cord from the Network Manager Module to the Panel Manager
6-inch patch cord
Network Manager module
Panel Manager
Figure 2–4
Connecting the Power Jumper from the Network Manager Module to the Panel Manager
Power jumper
Strain relief strap
