CommScope SCIL-B, Инструкция по установке

Страница: 5 / 12

5
4.18 Install a cable plug (hole towards outside) in all unused
closure cable ports.
5 Cable Installation (Fixed Cable Bracket)
5.1 Repeat the step 4.1 – 4.2
5.2 Cut the strength member on both sides at a distance
of 30 mm from the cable window cut.
5.3 Mark at 55mm and 90mm from the cable jacket end.
5.4 Repeat installation step 4.8 -4.9. Install 2pc ring trees
over the cable.
5.5 Wrap the cable with gel strip. Verify with a flat tool.
Continue wrapping the strip smoothly till the area between the
two blocking rings is filled with gel strip.
5.6 Remove the block when cable OD>16mm.
5.7 Tighten the screw to secure the strength member.
30mm