CommScope SCIL-B, Инструкция по установке

Страница: 7 / 12

7
6.1.5 Route the transportation tubes to the tray entrance.
Always route the tubes around the tray tower before entering the
tray.
6.1.6 Secure the transportation tube at the splice tray
entrance with two tie-wraps.
6.2
When using Tray 48
6.2.1 In case of a looped cable, Coil the loops and store
them under the tray, and use tie wraps to tie up the bundle
。
6.2.2 Remove the loose tubes up to 100mm from the cable
jacket end
。
6.2.3 Degrease the fiber bundle and slide the transportation
tubes over the fibers with overlap 100mm
6.2.4 Route the transportation tubes to the tray entrance as
shown.
6.2.5 Secure the transportation tube at the tray entrance
with two tie wraps
100 mm
50 mm