CommScope SCIL-B, Инструкция по установке

Страница: 6 / 12

6
5.8 Make sure the ring tree in the slot and secure the
cable.
5.9 Secure the cable with UV-resistant tie wrap
5.9.1 Apply unused cable ports with cable plugs. Wrap cable
plug with gel strip in the same way as wrapping cable.
5.9.2 Install a cable plug (hole towards outside) in all unused
closure cable ports.
6 Fiber preparation
6.1
When using Tray 24
6.1.1 In case of a looped cable, coil the loops and store
them in the space in front of the tower of the closure (loops can
be stored around the tower as well).
6.1.2 Remove the loose tubes of the to be spliced fiber
bundles up to 150 mm from the cable jacket (see drawing 5.1.4).
6.1.3 Degrease the fiber bundle. Slide the transportation
tubes over the fibers up to 50 mm from the cable jacket end (see
drawing 6.1.4).
6.1.4 Sketch for tube installation.