ADCP-96-040 • Rev D • January 2018 • Preface
Page vi
© 2018, CommScope, Inc.
GENERAL SAFETY PRECAUTIONS
STANDARDS CERTIFICATION
Telcordia
: This equipment complies with the applicable sections of GR-771-CORE
(Test Plan for ADC Fiber Optic Splice Enclosures), GR-326-CORE, and GR-3120-
CORE.
LIST OF ACRONYMS AND ABBREVIATIONS
The acronyms and abbreviations used in this manual are detailed in the following list:
ATS
Advanced Termination System
AWG
American Wire Gauge
C
Centigrade
F
Fahrenheit
FDH
Fiber Distribution Hub
FTTP
Fiber To The Premises
HMFOC
Hardened Multi-Fiber Optical Connector
MST
Multiport Service Terminal
OSP
Outside Plant
RMA
Return Material Authorization
UMB
Universal Mounting Bracket
Warning:
Wet conditions increase the potential for receiving an electrical shock when
installing or using electrically-powered equipment. To prevent electrical shock, never install or
use electrical equipment in a wet location or during a lightning storm.
Caution:
Fiber optic cables may be damaged if bent or curved to a radius that is less than the
recommended minimum bend radius. Always observe the recommended bend radius limit when
installing fiber optic cables and patch cords.
Danger:
Exposure to laser radiation can seriously damage the retina of the eye. Do not look
into the ends of any optical fiber. Do not assume the laser power is turned-off or that the fiber is
disconnected at the other end.
Warning:
Contact with underground cables or pipes, especially electric power cables and gas
service lines, could interrupt local utility service and cause serious personal injury and
extensive property damage. Before digging, check with all local utilities for the presence of
buried cables or pipes.
