CommScope ION-M23 SDARS, Руководство пользователя

Страница: 32 / 47

4. Commissioning
Page 32 MF0150A9A _prel.docx Manual for ION-M23 SDARS 3-Sector
5. Fasten the insulator by screwing the
backshell tight onto it. Use a spanner
with opening 32 to screw the backshell
tight (no gap).
6. Place the appropriate seal parts (with
one groove for one contact or two
grooves for two contacts) over the
cable(s) and push them into the
backshell.
7. Bring the plastic ring over the cable(s), push it into the backshell and compress the
seals and plastic ring by screwing the clamp ring tight (no gap) using a spanner
with opening 20. ***
8. Connect the plug to the optical-fibre
connector of the Remote Unit, again by
fitting a stamp on the plug into the
groove of the connector.
9. To lock the connector, push the black
locking ring forward.****
*** For disassembling, release the clamping ring and remove the seals and the plastic ring first.
**** Locking mechanism: The system of locking the plug is based on a “push-pull” mechanism. The
locking ring has to be pushed forward to lock the connector and pulled back to free the connection.
Seals with
one groove
Groove
Push forward to lock, pull
back to free connection
No gap
Screw tight until gap is closed