solution
PON
C1004W Installation Guide
31
Manual or automatic selectable channel
Mixed use of 802.11b, 802.11g, 802.11n, 802.11ac
Support 11n/11ac dual current mode
Encryption (Keys such as Hex, ASCII, special character should be
supported)
64/128bit Static WEP Key
WPA/WPA2/WPA-PSK/ WPA2-PSK
4 or more Virtual AP (Multi SSID), and each SSID supports different
encryption
SSID should support alphabet, numeric, special character
Hidden SSID
Support WMM(Wireless LAN QoS function: IEEE 802.11e)
IEEE 802.1x
EAP MD5/EAP TTLS/PEAP
RADIUS Client function
Support TR-069
WDS
WMF
Client isolation
Support WPS with hardware PUSH button and 'configured' mode.
O&M
System or module LED.
Memory structure that allows to save or modify Configuration File
Memory should keep the contents of the memory even when power
supply is stopped.
Local and remote Firmware Upgrade (The existing Image should be
kept when upgrade fails).
Normal session for system management even when CPU overload
Remote Management
Remote access through Telnet(RFC 854, 855)
CPE Management Server
Device Reset
Setting and changing Config
Firmware download only through Web Server by TR069
Time sync through NTP Server
Device status and performance management
Support storage function and SAMBA by USB
IPv6
Support Dualstack
Support DHCP Server and IPv6 addressing type: SLAAC (Stateless
Address)
Using DHCP Server and IPv6 addressing type: Stateful
Support ICMPv6
Support IPv6 Filtering
System Operation and
Maintenance
Link Measurement and
diagnostic
Support OAM Remote Loop back test.
OLT detects EPON Signal Strength to check the status of ONU signal
received/transmitted based on
Physical
Characteristics
Optical characteristics
Transmission distance: 10Km or 20Km(Optional)
Transmission quality: BER 10-10 or lower
Transmission level : -1~4dBm
Dielectric resistance
100Mohm or higher (based on DC 500V)
