solution
PON
C1004W Installation Guide
1
Safety Precautions
Warning
Before you install the C1004W unit, read this section. Product installation should be
conducted only by professional installer who has been accurately trained.
Electrical safety
Always use caution whenever handling live electrical material and
contacts.
Do not install electrical equipment in wet or damp conditions.
Ensure that the power source for the unit is adequately rated to assure
safe operation and provides current overload protection.
Do not allow anything to be put on the power cable, and do not place
this unit where people will stand or walk on the power cable.
This unit should be used with the approved power adaptor which is
included in the product package.
Warning
Do not open the enclosure without Commscope’s permission and technical support, which
voids the warranty.
Laser safety
Use of controls or adjustments, or performance of procedures other
than those specified herein may result in hazardous laser radiation
exposure.
To avoid exposure to radiation, do not stare into the aperture of a fiber-
optic port. Invisible radiation might be emitted from the aperture of the
port when no fiber cable is connected.
Do not bend the optic fiber cables severely, which may damage the
fiber or prevent the signal from being transmitted properly.
Always keep unused fiber-optic ports capped with a clean dust cap.
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Never stare
into beams or look directly to optical connectors.
Preventing EMI
When you run wires for any significant distance in an electromagnetic
field, electro magnetic interference (EMI) can occur between the field
and the signals on the wires.
Bad plant wiring can result in radio frequency interference (RFI).
If Strong EMI occurs in the installation place, consult RFI experts to get
rid of it.
