solution
PON
8
Installation
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments.
The sequence of installation is described from step 1 to 9 as below:
Step 1:
Push gently down the hinged cover to connect the 10G SFP+ optic module.
Step 2:
Slide the 10G SFP+ optic module into the socket on the ONU.
Step 3:
Connect the SC/APC connector on one end of a single-mode optical fiber into the
optical terminal of the optical outlet (it could be a splitter or PIM card of an OLT) and
the other end into the PON port of C1004W by pushing it until a click sound is heard.
Step 4:
Lift the hinged cover back into its position with care.
