CC
CC
nOTe:
Tuck all
electrical connections
into the electrical box.
Single
Fixture
Wiring
Continuous
Mount
Wiring
nOTe:
Electrical connections will be
covered by the wire way cover.
7 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
6
Attaching the mounting bracket to the electrical box
□
Mount the mounting bracket (AA) to the electrical box using the two electrical box screws (BB).
Installation (continued)
7
Attaching the housing to the ceiling
□
Drill a 3/4-in. hole large enough to clear the closed flaps of the butterfly nut on the toggle bolt into each of
the screw locations marked on the ceiling.
□
Install a toggle bolt (CC) in each drilled mounting hole, but do not tighten fully.
□
Align the 2 mounting keyholes on the fixture housing (A) with the 2 toggle bolts (CC) in the ceiling, allowing
the bolt heads to come through the large ends of the keyholes.
□
Slide the housing (A) until the heads of the toggle bolts (CC) slide into the narrow ends of the keyholes.
□
Finish tightening the toggle bolts (CC) until the fixture housing (A) is tightly secured to the mounting surface.
nOTe:
The toggle bolts (CC) are only to be used for mounting the fixture to plaster or drywall surfaces. If mounting to another type of
surface, please replace the toggle bolts (CC) with the appropriate type of mounting hardware (not included).
AA
BB
AA
BB
