Power Supply Cover Plate
3/4 in. knockout 1/2 in. knockout
Green ground
5 HoMEDEPoT.CoM
Please contact 1-877-527-0313 for further assistance.
suspension Mounting
A
Screw
24.6 in.
1
Making marks on the ceiling
□
Mark two spots on the ceiling 24.6 in. apart for
suspension mounting before the installation.
2
Mounting to a drywall ceiling
□
Drill two holes large enough to clear the closed flaps of the
butterfly nut on a toggle bolt (not included).
□
Fasten the toggle bolt into the butterfly nut before
inserting the flaps into the ceiling.
□
Tighten the toggle bolt.
3
Mounting to a wood ceiling
□
Drill two 1/16 in. diameter holes in the ceiling to
accommodate hook screws (not included).
□
Tighten the hook screw (not included) into the ceiling.
4
Removing the power supply cover plate
□
Remove the screw that attaches the power supply cover plate to the fixture body (A).
□
Put the screw aside as it will be needed to reattach the power supply cover plate to the fixture body (A) in a later step.
□
Remove the knockout hole on the power supply cover plate.
□
Feed the wiring out through the power supply cover plate. Make the conduit (not included) through the knockout hole and tighten
the conduit securely.
nOTe:
The user can choose Type 1/2 or Type 3/4 knockout hole for feeding the wiring based on the conduit used.
