8
2
Attach the fixture to the mounting surface
□
Remove the screw that attaches the power supply cover plate to the fixture body (A).
□
Feed the wiring from the electrical box out through the mounting bracket (EE).
□
Align the slots on the fixture body (A) with the mounting bracket (EE). Tilt one side of the fixture body (A) and insert it into the
mounting bracket (EE), and then push the other side of the fixture body (A) into the mounting bracket (EE) to ensure that the
whole fixture is attached to the mounting bracket (EE). Finally, secure the fixture body (A) by using four short screws (JJ).
3
Making the electrical connections
□
Detach the fixture housing (B) from the fixture body (A).
□
Feed the electrical wires out through the fixture body (A).
□
Connect the hot and neutral (black and white) wires from the
fixture body (A) to the same color wires from the electrical box.
□
Connect the green wire from the fixture body (A) to the grounding
wire from the electrical box.
□
Cover the wire connections using the wire connectors (CC).
□
Wrap the wire connectors (CC) with electrical tape (not included)
for a more secure connection.
□
Position the wires back inside the fixture body (A) and reattach
the fixture housing (B) to the fixture body (A)
.
□
Turn on the light switch to activate the fixture.
Screw
Screw
surface Mounting (continued)
Power supply cover plate
EE
A
CC
B
A
A
