10
downrod Mounting (continued)
2
Attach the fixture to the mounting surface
□
Feed the wiring out through the downrod from the electrical box, and into the fixture body (A).
□
Refer to the installation steps for surface mounting. Align the slots on the fixture body (A) with the mounting bracket (EE). Tilt one
side of the fixture body (A) and insert it into the mounting bracket (EE), and then push the other side of the fixture body (A) into the
mounting bracket (EE) to ensure that the whole fixture is attached to the mounting bracket (EE). Finally, secure the fixture body (A)
by using the four short screws (JJ).
3
Making the electrical connections
□
Detach the fixture housing (B) from the fixture body (A).
□
Feed the electrical wires out through the fixture body (A).
□
Connect the hot and neutral (black and white) wires from the fixture body (A) to the same color wires from the electrical box.
□
Connect the green wire from the fixture body (A) to the grounding wire from the electrical box.
□
Cover the wire connections using the wire connectors (CC).
□
Wrap the wire connectors (CC) with electrical tape (not included) for a more secure connection.
□
Position the wires back inside the fixture body (A) and reattach the fixture housing (B) to the fixture body (A)
.
EE
JJ
CC
A
B
Screw
Screw
