13 HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Installation – Guy Wires
1
Secure the Guy Wires
□
Secure the four (4) guy wires to the attachment points on
the frame.
2
Secure the Guy Wires to the Building
□
Secure the four (4) guy wires to the building structure so
that the guy wires are at a 45 degree angle from the drop
and 90 degrees from each other. Tighten both nuts on each
cable clamp using a 3/8” wrench.
NOTE: GUY WIRES NEED TO BE SECURELY MOUNTED
TO THE BUILDING. YOU CAN USE GENERIC BEAM
CLAMPS WHEN MOUNTING TO I-BEAM OR STEEL
TRUSS. LAG I-BOLTS CAN BE USED WHEN MOUNTING
TO WOOD GLULAMS. DO NOT WRAP GUY WIRES
AROUND THE BUILDING STRUCTURE.
3
Hand Tighten
□
Hand tighten each turnbuckle, ensuring that the fan
remains level.
4
Once Level, Fully Tighten
□
Once the fan is level and the guy wires are taut, tighten
both jam nuts (circled below) on each guy wire using a ½”
wrench.
NOTE: DO NOT USE TOOLS TO TIGHTEN THE
TURNBUCKLES; ONLY USE TOOLS TO TIGHTEN
THE JAM NUTS. THE GUY WIRES MUST BE TAUT SO
THAT THERE IS NO MOVEMENT IN THE MOTOR OR
EXTENSION TUBE.
45°
90°
