4
1
Turning off the power
□
Make sure the power is turned off at the source to the
recessed can housing where the fixture will be installed.
Remove the existing bulb and trim, revealing the socket.
NOTICE:
Stick the replacement label on the inner
wall of the recessed housing before installation.
2
Connecting the cables
□
Plug the cable connector on the socket adapter (B)
into the connector on the LED light module (A).
3
Connecting the cables
□
Plug the cable connector on the socket adapter (B)
into the connector
on the LED light
module (A).
Installation
WARNING:
Shut off the power at the circuit breaker or fuse panel before removing the old fixture.
Item # 1005731229/ Model # 538551010 and Item # 1005731250/ Model # 538552010 can be installed into 4 in. housings.
Item # 1005733091/ Model # 538561010 and Item # 1005732803/ Model # 538562010 can be installed into 5 in. and 6 in. housings.
B
B
A
4
Inserting the friction clips into the
recessed can
□
Insert one side of the downlight
into the recessed can
and firmly push against the
friction clip, while inserting
the other side into
the can housing.
5
Pushing the LED light module into
the recessed can
□
Once both clips are inside, carefully push the LED light
module (A) up into the recessed can housing until the trim is
flush with the ceiling surface.
A
