7
Installation (continued)
E
D
CC
5
Attach the mounting plate
to junction box
(for wall/eave mounting over standard
recessed junction box)
☐
To remove the mounting plate (D) from the
back of the fixture, loosen the set screw
(E) using the hex head allen key (CC). (fig
13)
☐
Align the holes of the mounting plate (with
the "TOP" marking oriented upwards OR
closest to wall if eave mounted) with the
junction box. Secure the mounting plate (D) to
the junction box with the two #8 screws (AA).
(fig 14)
Wall Mount
NOTE:
Use any other suitable bolts or fasteners as
applicable for attachment to your mounting surface.
AA
D
(fig 13).
(fig 14).
(fig 15).
TIP:
Only unscrew the mounting plate set screw (E) far
enough to remove the mounting plate (D). Do not fully
remove the set screw (E).
6
Attach hands-free wire
(for wall/eave mounting over standard recessed junction box)
☐
Take the round "ball" head of the hands-free wire (F),
attached to the back of the mounting plate cover, and
place it behind the bottom-center "notch" of the
mounting plate (D).
☐
Ensure the fixture can now hang freely to allow for
hands-free connection of the electrical wires.
Wall/Eave Mount
D
F
