Operation
☐
Once the fixture is installed, turn power
back on from the circuit breaker and
switch.
☐
Flip the switch ON and OFF to ensure the light
functions properly.
Switch-controlled operation enables the light fixture to turn ON and OFF by flipping a
standard light switch. Dusk-to-Dawn control requires the addition of an external
photocell, sensors or timer (sold separately).
SWITCH-CONTROLLED
NOTE:
This fixture is not dimmable, so it is best to
not wire to a dimming switch.
SWITCH
CONTROLLED
11
Troubleshooting
If Light does not come on:
☐
Verify that the power is turned ON from the circuit breaker and wall switch.
☐
Verify the wiring for the fixture is done properly.
☐
Verify the line voltage is correct.
If Light flickers:
☐
Do not wire to a dimming switch. Use a standard ON/OFF switch.
Care and Cleaning
☐
☐
Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints, solvents, or any other
chemicals on this light fixture. They could cause a premature deterioration of the finish and may void the
warranty.
☐
Do not spray the light fixture with a hose or power washer.
Shut off main power supply before cleaning the product. To prolong the original appearance, clean the light
fixture with clear water and a soft, damp cloth only.
