IMPORTANT:
Adjust the desired left to right orientation of the
fixture head (A) on the wall/eave mounting plate cover (C) at this
step. (fig.10 )
6
Installation (continued)
□
Place the sealing gasket (FF) on the knuckle
stem and thread wires through the hole of the
wall/eave mounting plate cover (C), being
careful not to pinch the wires. (fig 8)
□
Pass the fixture's threaded stem (B) through the
center hole of the mounting plate cover (C). Secure
with the lock washer (EE) and tighten with the
wing nut (DD). (fig 9)
(for wall/eave mounting over standard
recessed junction box)
3
OPTION: Assemble
the wall/eave
mounting plate cover
(fig 8)
(fig 9)
(fig 10)
A
A
C
B
C
FF
EE
DD
4
Option: Mount to surface mount
junction box or landscape ground post
G
B
Landscape ground
post sold separately
(fig 12)
Domed
junction box
cover (sold
separately)
G
B
(fig. 11)
HOMEDEPOT.com
Please contact 1-844-584-3776 for further assistance.
NOTE:
The fixture comes with the 1/2 in. threaded NPS
swivel knuckle stem (B) and is compatible with standard
domed junction box covers and landscape ground posts which
are sold separately.
For Ground and Wall/Eave Mounting
☐
Place wires through the hole in the domed
junction box cover or landscape ground post
(fig 11) and (fig 12).
☐
Place the conduit lock nut (G) on the back side of the
domed cover.
☐
Screw the 1/2 in. NPS threaded knuckle mount (B)
into the center hole of the domed plate or
landscape post and, if the hole is not threaded,
use the conduit lock nut (G) to tighten the fixture
into place.
☐
Use provided hex head screwdriver to loosen
the bolt in the center of the knuckle mount and
select the desired angle. Tighten the screw to
secure into place.
NOTE:
The fixture comes with the knuckle stem and the
wall/eave mounting base plate cover (C) in the box.
