13 HoMEDEPoT.CoM
Please contact 1-877-527-0313 for further assistance.
5
Making the electrical connections
□
Connect the hot and neutral (black and white) wires from
the power supply box to the same color wires from the
electrical box.
□
Connect the green wire from the power supply box to the
grounding wire from the electrical box.
□
If 0-10v dimming circuit is available, connect the purple
and gray wires from the power supply box to the same
color wires from the electrical box.
□
If dimming is not desired, wrap the ends of the purple and
gray wires with electrical tape to cover the wire.
□
Cover the wire connections using the wire connectors (EE).
□
Wrap the wire connectors (EE) with electrical tape for a
more secure connection.
□
Position the wires back inside the power supply box.
6
Reattaching the power supply box to the fixture body
□
Align the screw holes in the fixture body (A) with the screw holes in the power supply box, making sure all wiring is thoroughly
tucked inside the power supply box.
□
Fasten the fixture body (A) to the power supply box with the previously removed screws, using the power tool hex bit (FF).
7
Restoring power
□
Restore power at the electrical panel.
□
Turn on the light switch to activate the fixture.
downrod Mounting (continued)
Power Supply Box
EE
BB
A
A
Power Supply Box
BB
A
FF
