7 HoMEDEPoT.CoM
Please contact 1-877-527-0313 for further assistance.
suspension Mounting (continued)
7
Making the electrical connections
□
Feed the electrical wires from the fixture (A) through the cover plate (AA).
□
Connect the hot and neutral (black and white) wires from the fixture body
(A) to the same color wires from the electrical box.
□
Connect the green wire from the fixture body (A) to the grounding wire from
the electrical box.
□
If 0-10v dimming circuit is available, connect the purple and gray wires
from the power supply box to the same color wires from the electrical box.
□
If dimming is not desired, wrap the ends of the purple and gray wires with electrical
tape to cover the wire.
□
Cover the wire connections using the wire connectors (EE).
□
Wrap the wire connectors (EE) with electrical tape for a more secure connection.
□
Position the wires back inside the electrical box and attach the cover plate (AA) to the
electrical box using the electrical box screws (DD).
8
Restoring power
□
Restore power at the electrical panel.
□
Turn on the light switch to activate the fixture.
1
Removing the power supply box
□
Remove the four screws that attach the power supply box to the LED fixture body (A) using the power tool hex bit (FF).
□
Put the screws aside as they will be needed to reattach the power supply box to the fixture body (A) in a later step.
□
Lift the power supply box from the fixture body (A) and unplug the Quick Connect wires.
surface Mounting
Power Supply Box
Quick
Connect
A
Power Supply Box
A
FF
DD
AA
