10
surface Mounting (continued)
6
Making the electrical connections
□
Connect the hot and neutral (black and white) wires from
the power supply box to the same color wires from the
electrical box.
□
Connect the green wire from the power supply box to the
grounding wire from the electrical box.
□
If 0-10v dimming circuit is available, connect the purple and
gray wires from the power supply box to the same color
wires from the electrical box.
□
If dimming is not desired, wrap the ends of the purple and
gray wires with electrical tape to cover the wire.
□
Cover the wire connections using the wire connectors (EE).
□
Wrap the wire connectors (EE) with electrical tape for a
more secure connection.
Power Supply Box
EE
BB
A
7
Reattaching the fixture body to
the power supply box
□
Position the wires back inside the power supply box.
□
Align the screw holes in the fixture body (A) with the
screw holes in the power supply box, making sure all
wiring is thoroughly tucked inside the power supply box.
□
Fasten the fixture body (A) to the power supply box with
the previously removed screws, using the power tool hex
bit (FF).
A
Power Supply Box
FF
8
Restoring power
□
Restore power at the electrical panel.
□
Turn on the light switch to activate the fixture.
