Commend GEC 880, Руководство пользователя

Страница: 22 / 24

The station GEC 880
Page 22 of 24 Version 1.1/1107
Gong at outside area
n
During the gong signal conversation is not possible (in both directions).
n
If a gong is initiated during a conversation, the conversation is re-
established when the gong is over.
Setting of Station Parameters
The following parameters can be set:
The selected parameters are automatically saved. Even when the power
supply is disconnected the selected parameters remain stored.
Acknowledgement tones
There are two types of acknowledgement tones:
n
“Beep” = OK
n
“Boing” = not available
At the buttons and no acknowledgement tones are audible.
Button Function Display
Press to trigger a gong signal at the outside loud-
speaker(s) to attract the attention of customers.
GONG
Press to abort the gong signal immediately.
Button Function
Press to enter the user settings mode. Press the button again to
cycle through the parameters.
Press to decrease the value of the current parameter.
Press to increase the value of the current parameter.
Press to exit the parameter settings mode at any time.
Parameter settings mode is automatically quit after 5 seconds of
inactivity.
Parameter Description Value range
ACK
ACKnowlegement tones:
“Keypad tones” ON/OFF 0 ....OFF
1 ....ON
LCD Adjustment of LC-display contrast 1 ....10
LED
Brightness of the LED see ”Day / Night Mode”
on page 21
1 ....10
VCI
Volume Chimes Internal:
Volume level for playback of chimes at the
inside station
1 ....10
VEB Volume of the outside station in BOOST-mode 1 ....13
VEX Volume of the outside station 1 ....13