GEC 880
The station
Version 1.1/1107
Page 21 of 24
Volume settings
Volume settings are for conversations only (not for tones)!
Special functions
Display of Station Type / Firmware
Via this feature the operator can provide support engineers hints about his
specific device (e.g. about the amount of features implemented or about the
availability of new software updates).
Day / Night Mode
Via this feature the operator can select the brightness of the LED to fit the
time of day:
n
Bright LED (level 10 = Max) during the daytime for easy recognition
n
Dimmed LED for night time to prevent glare (level adjustable,
see ”Setting
of Station Parameters” on page 22
)
Note:
If the brightness is adjusted, changes are only visible if night
mode is active (press
button).
Button
Function
Display
Decrease volume level of the built-in loudspeaker.
VIN:
Increase volume level of the built-in loudspeaker.
VIN:
Press to toggle between normal and BOOST volume at the
outside loudspeaker (only possible during conversations).
Setting of the normal and BOOST volume
see ”Setting of
Station Parameters” on page 22
.
BOOST
Decrease volume level of the headset loudspeaker
1
.
VHS:
Increase volume level of the headset loudspeaker
1
.
VHS:
1
...Only if a headset is connected, otherwise “
NO
HS
” is shown in the display.
Button
Function
Display
Press and hold to display the station type and the
firmware version. The station type is displayed for
two seconds and after that the firmware version for
as long as the button is pressed.
GEC881
V50102
Button
Function
LED
Press to switch from day to night mode and vice
versa.
Night:
Day:
