Touch screen station TS 8210V I
1.1/0418
15
4.1.4
Mounting the surface mount kit TSSH 10V
2
1
2a
..... IP65 cable grommet
2
..... Surface mount kit (metal)
1
If the
cable inlet
at the
backside
of the surface mount box is used,
the cable must be inserted in the cable grommet before mounting
the surface mount box.
2a
If the
cable inlet
at the
bottom
of the surface mount box is used,
the cable grommet from the front panel box must be used (not pictured).
Note:
Cable grommets for the surface mount box must be ordered separately!
2b
2b
Mounting using mounting kit
Note:
- The cable inlet must be on the bottom of the surface mount kit.
- Ensure the correct mounting direction: The microphone must be located at
the bottom edge of the station and it may not be covered.
For installation of cable grommets, see illustration.
Note:
Use a separate grommet for each cable.
Snap in
Insert cable
Pull back tight
