Touch screen station TS 8210V I
12
1.1/0418
4
Installation
4.1
Mounting
4.1.1
Recommended mounting height
It is recommended to mount the upper edge of the station approx. 1.65 m (5.4 ft) from the fin-
ished floor. Adapt the mounting height to individual needs. For barrier-free operation, it is rec-
ommended to mount the station with enough space to walls or corners.
ATTENTION: Mounting instructions
Do not expose the station to extreme temperatures (see “Technical data”).
Do not expose the station to direct sunlight.
For flush mounting, the flush mount kit TSFB 10V is required (available separately).
For surface mounting, the surface mount kit TSSH 10V is required (available separately).
Observe the country specific standards for installation, mounting and configuration.
When opening the station, ESD precautions must be observed.
The station may only be opened by authorised service engineers.
Ensure the correct mounting direction: The microphone has to be located at the bottom
edge of the station and it may not be covered.
To observe the EU guidelines, the snap-on ferrite (in the extent of supply) has to be
snapped on the LAN cable.
Make sure that the functional earth is connected.
(KPKUJGFƃQQT
appro
x. 1
.65 m (5.4 ft)
