Touch screen station TS 8210V I
1.1/0418
13
4.1.2
Mounting the flush mount kit TSFB 10V – wall mounting
Snap in
Insert cable
Pull back tight
..... IP65 cable feed through
For the installation of cable grommets, see illustration.
Note:
Use a separate grommet for each cable.
1
..... Flush mount box
Mounting using mounting kit
Note:
- The flush mount box has to be mounted flush with the wall.
- Ensure the correct mounting direction: The microphone has to be located at
the bottom edge of the station and it may not be covered.
- Sealing material for the space between the wall and mounting box must be obtained from
other sources.
2
Fix the flush mount box, the spacers and the mounting brackets into place with screws.
2a
To prepare for plastering, it is recommended to fix the flush mount box to
the wall using the mounting holes on the mounting brackets.
2b
Before plastering, insert the flush mount cover (not pictured).
2c
1
2a
2b
2
1
