6
+61 2 9975 6001
When a Source key is pressed, the associated LED is lit and the following happens:
Source is selected (for fast response when the projector is already on)
Screen control DC trigger (Relay 1) is turned on
Projector is turned on (if it's already on, this will be ignored)
Following a lamp warmup delay of 45 seconds, the Source is re-selected.
When OFF is pressed, the following happens:
Projector is picture muted
Screen trigger is released
Following a “grace” delay of 15 seconds, the projector is turned off. (You have 15
seconds to cancel Projector Off by pressing a Source key if the OFF key was pressed
accidentally)
No keypress or PIR activity timeout is 2 hours. The same functions as the OFF key are
executed.
All the pre-programmed applications are available in the Examples folder in the Joey Editor
under the filenames listed in the following table.
Code Filename
Comments
1111
benq_1_u9.jy
Later BenQ models
1112
dell_1_u9.jy
Most Dell models
1113
Controller_u9.jy
Compatible with Standard Template Controller
1114
epson_1_u9.jy
Most Epson models
1121
Epson_Alt_HDMI_2_u9.jy
Epsons with alternative HDMI 2 command.
1122
hitachi_1_u9.jy
All except very early Hitachi models
1123
J_32_9_Tester.jy
This program tests all keys and functions.
1124
mitsubishi_1_u9.jy
All except very early Mitsubishi models
1131
nec_192_u9.jy
NECs with baud rate set to 19.2k
1132
nec_384_u9.jy
NECs with baud rate set to 38.4k
