Comfortflame.US.com
900563-00NC
16
INSTALLATION
Continued
Figure 22 - Screen Pocket Location
Figure 20 - Screw and Hood Placement (Model May Vary From
Illustration)
Figure 21 - Installing Fireplace Screen (Model May Vary From
Illustration)
Screw
Rear Hole
Top View of Rod Layout
Rod
Front
Hole
Ring
Screen
Identification
Label Location
Screws
Hood
Figure 23 - Locating Access Cover Plate
Access
Panel
Screen Pocket
INSTALLING FIREPLACE HOOD AND SCREEN
1. Attach hood to firebox using screws provided (see Figure 20).
2. Insert each rod through all rings located at top of screen.
3. Insert first rod into rear hole in left side of firebox. Fasten rod to
rear hole near center of firebox using #10 x 3/8" Phillips screw
provided (see Figure 21).
4. Insert other rod into front hole on right side of firebox and fasten
using remaining Phillips screw.
LOCATING ACCESS COVER PLATE
Sheet metal cover plates located underneath front hearth refractory
(if included) may have shifted or moved out of place while fireplace
was in transit. These cover plates must be kept in the proper location
prior to using the fireplace (See Figure 23).
