Comelit 49808, Инструкция по эксплуатации

Страница: 49 / 80

Digital Video Recorder art. 49808-49816
39
Figure 58 — Health Check screen
The DVR can be configured to run self-diagnostics and report
the results.
Highlighting the box beside
System
and pressing the button
allows you to select the interval that you want the DVR to run
self-diagnostics on the system. You can select from
1 hr.
to
30 days
or
Never
.
Highlight the Setup... box beside Check Recording and press the
button. The Check Recording screen appears.
Highlighting Schedule On and pressing the button toggles On and
Off. When set to On, you can select the day, time range and interval that
you want the DVR to run self-diagnostics on the recorder. The
Interval
can be selectable from
1 min.
to
7 days
or
Never
. The box allows
you to delete a check recording schedule.
Highlighting the box under the
Interval
heading beside each alarm-in and pressing the button allows you to change the
interval that you want the DVR to run self-diagnostics on Alarm Inputs. You can select from 1 hr. to 30 days or Never .
Highlight the Storage tab, and the Storage screen displays.
Figure 59 — Storage screen.
Highlight the box beside
Disk Bad Notify
, and press the
button. Select percentage level of bad disk sectors at which
you want the DVR to trigger an alert. Percentage levels range
from 10% to 90%.
Highlight the box beside Disk Almost Full Notify , and press
the
button. Select the percentage level of disk usage at
which you want the DVR to trigger an alert. Percentage levels
range from 80% to 99%.
Highlight the first box beside Disk S.M.A.R.T. , and press
the
button. Use the Up and Down arrow buttons to scroll
through the numbers. Refer to the hard disk drive
manufacturer’s documentation for the correct temperature
setting. If the temperature of hard disk drive exceeds the
defined threshold, the system triggers an alert.
Highlight the second box beside
Disk S.M.A.R.T.
, and press the
button. Select either
ºC (Celsius)
or
ºF
(Fahrenheit) , and press the
button.
Highlight the
Actions
tab, and the System Event Actions screen displays.