Comelit 49808, Инструкция по эксплуатации

Страница: 35 / 80

Digital Video Recorder art. 49808-49816
25
You can define the screen layout in a variety of formats and set the DVR to sequence through the different screen layouts
(pages) so that all the cameras will be displayed. You can also set up the DVR to display one camera or a group of
cameras all the time while cycling through the remaining cameras in a “cameo” window. This can be done with one
camera displayed full screen while displaying the cameo window as a PIP (picture in picture), or displaying the cameras
in a grid pattern with the bottom right window as the cameo.
NOTE: Sequence cannot be used in the 4x4 display mode of the 16-channel, and 3x3 mode of the 8-channel DVR.
You can adjust the display dwell time by highlighting the box beside
Interval
and pressing the button. You can
select dwell intervals ranging from 1 second to 1 minute.
Highlight Event Monitoring On and press the button. Pressing the button toggles between On and Off . When
it is
On
, the DVR will display the camera associated with the event when an event occurs.
Highlight the Spot Monitor tab to switch to the Spot Monitor screen.
You can define which cameras display sequentially on the
Spot Monitor. Highlight the box in the
Channels
column
and press the button.
Figure 32 — Spot Monitor screen.
Highlight the
VGA
tab to switch to the VGA screen.
Highlight the box beside Resolution and press the button.
You can select from 800x600, 1024x768 and 1280x1024.
Highlight
Full Screen
and press the button. Pressing the
button toggles between On and Off . When it is On , the
screen on the VGA monitor displays in full screen mode.
Highlighting Preview and pressing the button allows you
to preview how the screen will be displayed on the VGA
monitor.
Figure 33 — VGA screen.
Highlighting Position and pressing the button allows you to adjust the screen position on the VGA monitor.