9
www.combisteel.com
REPLACE SENSOR DETECTOR & LED LIGHT CIRCUIT BOARD
Replace Sensor Detector & LED Light Circuit Board:
1. Loosen screw on sensor detector & LED light circuit board holder. Use a screwdriver to pull the cover a little
to open it.
2. Take cover out lightly and the circuit board will come together ! Be careful there is wire connected on the
circuit board.
3. Loosen two screws on circuit board and replace a new one.
REPLACE DISPLAY CIRCUIT BOARD
Replace Display Circuit Board:
1. Move the sticker away. Be careful not to damage the hand dryer edge as it will affect the surface appearance.
2. Loosen two screws on the timer circuit board holder. Use a screwdriver to pull the holder a little to open it.
3. Take holder out lightly and the circuit board will come together ! Be careful there is wire connected on the
circuit board.
4. Loosen two screws on circuit board and replace a new one.
5. After replacing the new circuit board right, it is suggested to use a new sticker for best appearance.
