7
Safety
For your safety, follow these precautions when using your Vacuum Sealer:
•
Read Owner’s Manual and carefully before using the machine for the first time.
•
Do not use the Vacuum Sealer on wet or hot surfaces, or near a heat source.
•
Do not immerse machine or power cord in water or any other liquid.
•
Plug Vacuum Sealer into grounded power sources only, do not use extension cord.
•
To disconnect, unplug directly from power source. Do not disconnect by pulling on cord.
•
Do not operate appliance with damaged power cord.
•
Only use the Vacuum Sealer for its intended use.
•
Only use Vacuum bags, accessories and attachments.
Maintenance
•
Unplug before cleaning.
•
Regularly clean appliance with damp cloth and mild soap to remove crumbs, dust, debris.
•
Chamber Seal Gasket is removable to clean any liquids that may have escaped from Vacuum bag during process.
Operating Instructions
Preparations
•
Plug in machine.
•
When the machine is on, the light “Power” will illuminate.
•
Press “On/Off” button, digital displayer is on, fan starts. Now the machine is ready for all cycles.
How To Make Bag From Roll
1.
Choose roll with suitable width.
2.
Put the open end of the roll across the seal wire (please make sure the open end is across the seal wire); close and press
the lid.
3.
Press “Seal” button(or the quick-start button on the handle), seal time will count down to 0 from default setting, showing
on digital displayer. After this cycle, the machine lid will open automatically and beep.
** Press On/Off button to stop the machine’s all working processes.
4.
Take out the roll end and check the seal.
NOTE
: A positive seal will look “clear” upon inspection. If the seal is spotty, incomplete, wrinkle, white or milky, please
cut the seal and restart the sealing process.
5.
After end is sealed, measure bag to size of item, allowing 4.5cm of space and cut roll. Place item in bag and follow “how
to vacuum and seal with bags”.
How To Vacuum And Seal With Bags
1.
Choose suitable vacuum bag, place item in bag.
2.
Allow at least 4.5cm space after item is put in bag, to ensure better vacuum.
3.
Put the open end of bag across the chamber seal gasket. Please make sure that the open end is within the vacuum
chamber.
4.
close and press the lid.
5.
Press “Start” button, or press Quick-Start button.
6.
The machine goes to vacuum cycle. The value in digital displayer will count down from 9 to 0 (If the pressure does not
reach standard of -20”Hg, the value will stay at 2). During the vacuum process, the value on the digital displayer will
count down from default setting to 0. Then the machine goes to sealing cycle.
7.
After the sealing cycle, the machine lid will open automatically and beep.
8.
Take out the bag and check the vacuum and seal.
NOTE
: A positive seal will look “clear” upon inspection. If the seal is spotty, incomplete, wrinkle, white or milky, please
cut the seal and restart the sealing process.
9.
Please store the vacuum items properly after seal. All perishable foods must be refrigerated or frozen to prevent spoilage.
10.
Press On/Off button to stop the machine’s all working processes. If instant seal is needed, simply press “Seal” button.
How To Use “Pulse vac” Vacuum Function
Since the pressure under the “Pulse” vacuum function is set to be high, sometimes it is easy to destroy some delicate items
by high pressure in the vacuum bag. In this case, you can use the “Pulse” vacuum function to control the vacuum time and
pressure, and prevent crushing delicate items. When packing some juicy foods, you can also use this function and prevent
liquid being sucked out.
Содержание 7529.0005
Страница 1: ...1 Vacuum Machine 7529 0005 User Manual Gebruikershandleiding Gebrauchsanweisung Le mode d emploi...
Страница 5: ...5 www combisteel com The Vacuum Sealer Features...
Страница 22: ...22 www combisteel com Die Eigenschaften des Vakuumversiegelers...
Страница 31: ...31 www combisteel com Caract ristiques de l appareil de mise sous vide...