Maintenance
73
C2500CB-OM-EN-16
Cleaning
Clean the truck thoroughly before performing any diagnosis or maintenance
tasks. Pay particular attention to the areas of the truck where work is to be carried
out e.g. around the filters.
Do not use flammable solvents or cleaning agents that create harmful vapours.
Do not pressure wash near electrical components or inside the operating
enclosure.
Wear appropriate protective clothing such as goggles and gloves.
Blow dirt off or out. Always blow out the oil cooler and radiator cooling fins from
the inside to the outside.
When using a high pressure water or steam jet observe the following rules:
Maximum spray pressure 60 bar
Maximum steam temperature 90°C
Minimum distance 1 metre
Warm up the engine
Batteries
Wear protective clothing and safety glasses when working on the battery.
If acid contacts the skin wash immediately with clean water.
If acid contacts the eyes wash immediately with clean water and seek immediate
medical attention.
Keep sources of ignition away from batteries.
Do not place metal objects on or near the battery terminals.
Isolate the battery when working on the electrical system.
Always disconnect the battery before welding.
Follow the correct procedure when connecting and disconnecting the battery.
Disconnecting: First negative and then positive
Connecting:
First positive and then negative
Caution
Only carry out cleaning work on the engine when it is not running!
Cover all electrical/electronic parts and connections. (e.g. control units,
generator, solenoid valves etc.).
Do not aim the water/steam jet directly at electrical components.
Allow the engine to warm up.