USER MANUAL FOR RA-7100
RA-7100 II2 QI
Copyright - refer to title page
Page 39
ENU Status : 1-0-0
4.3.5 SYSTEM
INFO
Click on [System Info.] within Equipment Information, system information will be displayed in the right
interface of the OMT screen. In the interface the site ID of MU is described and the currently
accessed unit is indicated.
Figure 30: System Information
There are two methods to switch from different sites.
z
To switch to the MU or other sites, customer can right click on the message indicating the not
accessed unit. Select [Switch] in the pop-up menu, RU can be successfully switched to MU or
other sites.
z
To switch to the MU or other sites, customer can choose MU or other site which is under
monitoring, then click [Switch] on the bottom to switch to MU or other sites.
Figure 31: Switch between MU and RU
4.3.6 RF
PARAMETER
It is recommended to configure the following RF parameters for the first installation.
4.3.7 SWITCH
Switch is to enable/disable power for internal modules. When user checks and sets non-RF
parameters, such as checking physical antenna connection, switching off will disable equipment
power temporarily to protect PA in operation.
