USER MANUAL FOR RA-7100
RA-7100 II2 QI
Copyright - refer to title page
Page 38
ENU Status : 1-0-0
4.3.3 REMOTE CONNECTION TO OMT
If remote connection is needed, users can select [Remote connection via modem] in connection type
window. Select desired serial port and click “OK” in [Serial Port Configuration] window to go to OMT
main window. Click “connect” and the [Remote Connection] window will show up.
Figure 28: Remote Connection
Config: Enter the correct phone number (Users don't have to enter the password) and click “connect”.
After the modem is initialized, it will be connected remotely.
4.3.4 OMT
CONFIGURATION
After entering the OMT main screen, click the”Connect” button on the toolbar, to connect the
equipment to the OMT. Successful connection will be indicated by a message “Online OK” and
equipment parameters can be read and/or set.
Users can configure the parameters, and then set the parameters according to desired coverage
level and interference to other BTS signals.
OMT parameters include: Common Information, RF Information, Alarm Information, and Properties
Information.
Figure 29: OMT Main Window
