COMAC 109160, Руководство по эксплуатации и обслуживанию

Страница: 30 / 44

ROUTINE MAINTENANCE
INTERVAL MACHINE COMPONENTS PROCEDURE
DAIL
Y; BEFORE
A LONG
PERIOD OF INACTIVITY
Squeegee
Clean the vacuum chamber; the squeegee rubber blades; the suction nozzle (see
"CLEANING THE SQUEEGEE BODY" on page 31).
Scrubbing brush head body brushes
Clean the brushes in the scrubbing brush head body (see "CLEANING THE
BRUSH HEAD BODY BRUSHES" on page 32).
Recovery tank
Empty the recovery tank at the end of every working day (see "DRAINING THE
RECOVERY TANK" on page 31).
After emptying the recovery tank at the end of every working day, clean the vacuum
system filters (see "CLEANING THE RECOVERY TANK FILTER-FLOAT" on page
31).
Solution tank
Empty the detergent solution tank at the end of every working day (see
"EMPTYING THE SOLUTION TANK" on page 33).
WEEKL
Y
Machine water system
Clean the filter on the machine's water system (see "CLEANING THE WATER
SYSTEM FILTER" on page 33).
Machine vacuum unit
Make sure the vacuum duct in the rear part of the machine is thoroughly clean (see
"CLEANING THE VACUUM TUBE" on page 33).
Check the condition and wear of the rubber blades in the squeegee body, replacing
them if necessary (see "REPLACING THE SQUEEGEE BODY RUBBER BLADES"
on page 34).
Scrubbing brush head body brushes
Check the condition and wear of the brushes in the scrubbing brush head body,
replacing them if necessary (see "REPLACING THE BRUSH HEAD BODY
BRUSHES" on page 34).
MONTHLY Squeegee rubber blade levelling
Check the rubber blades in the squeegee body are properly levelled, adjusting them
if necessary (see "ADJUSTING THE SQUEEGEE BODY'S RUBBER BLADES" on
page 36).
30
26
1
24
11 12
13 14
28 27
9 10
8
9
10
11
12
13
20
19
3
8
2
1
2
7
5 4 6
7
4
3
5
6
2 1
23
17
20
15
21 25
16
18
22
D
C
B
A
19
14
17 18 15 16
14