Page 38 of 54
INSTRUCTION MANUAL
SGTEL-168
TELECOM LINE SURGE GENERATOR
1912 1 E l T o ro R d
●
Si l vera do, Ca lifo rni a 9 26 76
●
(9 49) 459 -96 00
●
co m-p o wer. com
REV070516
6.2 Surge
Menu
S U R G E : T Y P
E
A - 0 8 0 0
O N
: A +
B -
T
E S T
S : 0 0
1
0 7 4 s
►
- R U N
- O K
■
-
S A V E
From this single-page Surge Menu Screen, you are able to:
a)
define the
SURGE
type,
b)
define the coupling mode (terminals
ON
which the surge is coupled),
c)
define the number of surges (
TESTS
) to be applied,
d)
define the
DELAY
time between surges,
e)
SAVE
the defined surge parameters to memory;
and
f)
execute the defined surge event(s) (
RUN
the test)
Each of these functions are explained in detail in the following sections.
6.2.1
Surge Menu Items
6.2.1.1 Surge
Type
S U R G E :
T Y P E A - 0 8 0 0
The top line of the display, ‘
SURGE:
’, defines the type of surge
waveform to be applied. Use the keys on the front panel
to switch between following surge types:
1)
TYPE
A-0800
2)
TYPE
A-1500
3)
TYPE
B-1000
4)
TYPE
B-1500
5)
PL-2500
To select the surge type, press the key.
6.2.1.2 Coupling
Mode
O
N
:
A + B -
The second line, ‘
ON:
’, allows the user to select the front panel
output terminals to which the surge is to be coupled (
coupling
mode
). Use the
keys on the front panel to switch
between coupling modes. The coupling mode options will vary
based on the selected surge type.
To select the coupling mode, press the key.
